Everyone loves the taste of clean water and often the water quality from your tap doesn’t quite make the cut. Supplementing your water supply with bottled water can add up and using filtered pitchers require frequent filter changes without actually offering the highest quality filtration. If you want the find the best home water treatment system, you need to consider using a dedicated home filter system. At efilters, we specialize in helping homeowners add dedicated systems to their homes to provide quality filtered water on demand.
At efilters, we offer home filter systems from Everpure because they provide superior water filtration while being simple to install and maintain. These systems are designed to mount under your sink and use your cold water line to provide a constant source of filtered water. While most of these systems require a dedicated faucet to be installed, meaning you have to drill a hole in your countertop. If you do not want to take this step we also offer the Everpure PBS400 system. The PBS400 turns the cold water side of your existing faucet into your new source for filtered water.
So what makes Everpure the Best Home Water Treatment Systems? The secret is their amazing filter cartridge design. These metal cartridges are lined with a food safe layer to prevent any exposure to the outer casing while still being extremely resilient to high pressure. If you could look inside one of these filter cartridges, you would find a pleated filter membrane coated in Everpure’s MicroPure filtration media. This filter media helps remove the chemicals that cause foul tastes and odors as well as particulate matter up to ½ microns in size, or roughly 1/50000 of an inch.
Everpure also offers reverse osmosis filtration systems. At efilters, we offer the ROM II and ROM III reverse osmosis systems. Reverse Osmosis (RO) systems feature a prefilter cartridge that helps to remove chlorine and particulate matter that could damage or clog the RO membrane. The second filter cartridge contains the RO filter membrane, a synthetic membrane designed to imitate the permeability of a cell wall. The RO membrane can remove particles down to 0.00001 microns in size. The ROM III system features a third stage of filtration to remove any volatile organic compounds that make it through the RO membrane.
Maintaining your Everpure system is a simple process. When the filter cartridges approach the end of their lifespan, you will notice that the water flow will decrease. If you have an RO system, you will probably have to change the prefilter a few times before the RO membrane clogs. Typically, an RO filter should last 2 to 3 years and a prefilter cartridge lasts around 6 months if you are using an average of 3 gallons of water per day.
Replacing your Everpure filter cartridges is practically as simple as changing a lightbulb. You simply flip the shutoff and pressure release valves on the filterhead, unscrew and wiggle the old filter out of place, and then secure the new filter into place. Once this is done, all you have to do is run the system for a few minutes to flush the air out.
If you are ready to find the best home water treatment system for you, check out our selection of Everpure water filter systems at efilters. Our team is dedicated to helping homeowners find the best systems for providing on demand filtered water with minimal maintenance. If you are ready to have a constant source of clean refreshing water, let us help you find an amazing Everpure system for your home.
For more information about Everpure Water Filter Cartridge and Domestic Water Filter System Please visit : Efilters.